Roller shutter maintenance is one of the simplest ways to protect your premises, your staff and your investment.
However, many businesses only think about their shutters when something goes wrong.
At Kinetic Door Systems, we service, repair and install commercial roller shutters across the UK.
In this guide, we explain how often roller shutters should be serviced, what a service involves and the warning signs to watch for.
Why Roller Shutter Maintenance Matters
Roller shutter maintenance keeps your doors safe, secure and reliable every single day.
After all, commercial roller shutters open and close hundreds or even thousands of times each year.
Over time, springs weaken, guides collect dirt and motors work harder than they should.
As a result, small faults can quickly turn into breakdowns, security gaps or costly emergency call-outs.
Moreover, UK law expects employers to keep work equipment in good, safe working order.
For this reason, the PUWER regulations apply to powered industrial roller shutters on most commercial sites.
How Often Should Roller Shutters Be Serviced?
The right service interval depends on the type of shutter and how often your team uses it.
As a general guide, we recommend the following roller shutter servicing schedule:
- Manual roller shutters: at least once a year, especially on shop front shutters with light use.
- Electric roller shutters: usually every six to twelve months, depending on daily cycles.
- High-use industrial roller shutters: ideally every three to six months on busy loading bays.
- Fire rated roller shutters: by law, at least once a year, following BS 8524 guidance.
- Security shutters: similarly, every six to twelve months, so locks and curtains stay strong.
In addition, you should book an extra check after any impact, storm damage or unusual noise.
Ultimately, regular roller shutter maintenance costs far less than an emergency repair or full replacement.
What Happens During a Roller Shutter Service?
A professional roller shutter service follows a clear checklist from top to bottom.
Typically, a qualified engineer will:
- First, inspect the shutter curtain, slats and end locks for dents, wear or gaps.
- Next, clean the side guides and check the brush or rubber seals.
- Then, test the springs, barrel and bearings for balance and smooth travel.
- After that, check the motor, limit switches and control panel on electric roller shutters.
- Also, test safety edges, photo-eyes and the manual override.
- Finally, lubricate moving parts and record the findings on a service report.
Consequently, you get a written record that supports your health and safety duties and insurance cover.
Meanwhile, the engineer can flag any parts that may need attention before they fail.
Warning Signs Your Roller Shutters Need Attention
Even with planned roller shutter maintenance, you should watch for early warning signs between visits.
For example, call an engineer if you notice:
- Grinding, squealing or banging noises during operation.
- A curtain that moves unevenly, sticks or drops too quickly.
- Bent slats, damaged guides or visible gaps in the curtain.
- An electric motor that hesitates, overheats or stops part way.
- Remote controls or wall switches that only work some of the time.
- Locks that feel stiff or no longer secure the shutter properly.
Above all, never force a jammed shutter or try to adjust the springs yourself.
Instead, isolate the power and contact a trained roller shutter engineer.
Roller Shutter Maintenance Costs in the UK
Naturally, many business owners want to know what roller shutter servicing costs before they book.
As a rough guide, UK average prices often look like this:
- Single manual shutter service: around £80 to £150.
- Single electric shutter service: around £100 to £200.
- Fire rated roller shutter inspection: around £120 to £250 per shutter.
- Planned maintenance contracts: often cheaper per door for multi-shutter sites.
Please note, these figures are general UK averages only and do not reflect Kinetic Door Systems pricing.
Actual costs depend on the size, type, age, location and condition of your roller shutter doors.
So, for an accurate price for your site, contact us for a free quote.
DIY Checks Between Professional Services
Of course, you can also carry out a few simple checks between professional visits.
For instance, these quick tasks help keep roller shutter doors in good condition:
- Keep the side guides and floor area clear of debris.
- Wipe the curtain and guides with a damp cloth every few weeks.
- Watch and listen to the shutter as it opens and closes.
- Check that warning signs and safety labels remain visible.
That said, leave any adjustments, electrical work or spring tension to a qualified engineer.
How Kinetic Door Systems Can Help
Our team supplies, installs, repairs and maintains a full range of commercial doors and shutters.
In particular, we can help with:
- Roller shutters: manual and electric roller shutters for shops, warehouses and industrial units.
- Fire rated roller shutters: tested shutters that help stop fire and smoke spreading through your building.
- Fire door installation: certified fire doors fitted to the correct standards.
- Sectional overhead doors: insulated, space-saving doors for loading bays and workshops.
- Garage doors: secure, stylish garage doors for domestic and commercial properties.
- High speed doors: fast-acting doors that improve traffic flow and temperature control.
- Security & personnel doors: robust steel doors that protect people and property.
Want to see the quality of our work first? View our gallery of completed projects.
Alternatively, get in touch today to arrange roller shutter maintenance or a new roller shutter installation.
Frequently Asked Questions About Roller Shutter Maintenance
Q1: How often should roller shutters be serviced?
A1: Most roller shutters need a service every six to twelve months.
However, busy industrial roller shutters may need checks every three to six months.
Q2: Is roller shutter maintenance a legal requirement?
A2: Yes, in most workplaces PUWER requires employers to maintain powered doors and shutters.
In addition, fire rated roller shutters need at least one inspection every year.
Q3: How long do roller shutters last?
A3: With good roller shutter maintenance, commercial roller shutters often last 15 to 20 years.
Meanwhile, neglected shutters can fail much sooner.
Q4: Can I service my own roller shutter?
A4: You can clean the guides and watch for faults yourself.
Even so, springs, motors and electrics always need a trained engineer.
Q5: What if my electric roller shutter stops working?
A5: First, check the power supply and the control switch.
If the shutter still fails, use the manual override and call an engineer.
Keep Your Roller Shutters Working with Regular Maintenance
In short, regular roller shutter maintenance keeps your premises secure, safe and compliant.
Better still, it extends the life of your shutters and helps you avoid costly breakdowns.
To book a service or discuss new roller shutters, enquire now for a free, no-obligation quote.
For more expert advice on doors and shutters, explore our latest insights.